TM 5-3810-307-24-2-1
Drive Belt
Inspection
3/8 Inch Square Drive, 13 mm
Remove the drive belt.
Lift the tensioner to remove and install the belt.
NOTE
After the tensioner has been raised to
remove/ install the belt, check the torque of
the tensioner capscrew.
Torque Value: 43 Nm
[32 ft-Ib]
Inspect the belt for damage.
Transverse (across the belt width) cracks are
acceptable.
Longitudinal (direction of belt length) cracks that
intersect with Transverse cracks are not
acceptable.
Replace the belt if is has unacceptable cracks, is
frayed or has pieces of material missing.