TM 5-3810-307-24-2-2
Component or Assembly (Procedure)
Ref. No./Steps
Metric
U.S.
18.938 mm
MIN
0.7456 in.
Pedestal Shaft Diameter
18.975 mm
MAX
0.7470 in.
Tappet and Push Rods
15.936 mm
MIN
0.627 in.
Valve Tappet Stem Diameter
15.977 mm
MAX
0.629 in.
Pit marks on the tappet face are acceptable.
The following criteria defines the size of the pits allowed.
1. A single pit cannot be greater than 2mm [0.078 in.] diameter.
2. Interconnection of pits is not allowed.
3. Total pits when added together should not
exceed 6 mm [0.236 inch] diameter or a total of
4 percent of the tappet face.
Fuel System
Air Fuel Control (AFC) Banjo Fitting
(In-Line Pump)
24 Nm
Pipe Adapter (in cylinder head)
18 ft-lb
9 Nm
Tube Fittings
7 ft-lb
Fuel Filter Banjo Fittings
24 Nm
Supply Line Fittings
18 ft-lb
13 Nm
Return Line Fitting
10 ft-lb
9 Nm
Vent Screw
7 ft-lb
32 Nm
24 ft-lb
Fuel Filter Head Adapter
