TM 5-3810-307-24P
L-
Repairable item. Condemnation and disposal not authorized below specialized
repair activity (SRA).
A-
Item requires special handling or condemnation procedures because of specific
reasons (e.g., precious metal content, high dollar value, critical material, or
hazardous material). Refer to appropriate manuals/directives for specific
instructions.
c.
NSN (Column (3)). The NSN for the item is listed in this column.
d.
CAGE (Column (4)). The Contractor and Government Entity Code for Manufacturer (CAGE)
is a 5-digit numeric code which is used to identify the manufacturer, distributor, or
Government agency, etc., that supplies the item.
e.
PART NUMBER (Column (5)). Indicates the primary number used by the manufacturer
(individual, company, firm, corporation, or Government activity), which controls the design
and characteristics of the item by means of its engineering drawings, specifications
standards, and inspection requirements to identify an item or range of items.
NOTE
When you use a NSN to requisition an item, the item you receive may have a
different part number from the part ordered.
DESCRIPTION AND USABLE ON CODE (UOC) (Column (6)). This column includes the
f.
following information:
(1) The Federal item name and, when required, a minimum description to identify the item.
(2) Items that are included in kits and sets are listed below the name of the kit or set.
(3) Spare/repair parts that make up an assembled item are listed immediately following the
assembled item line entry.
(4) Part numbers for bulk materials are referenced in this column in the line item entry for
the item to be manufactured/fabricated.
(5) When the item is not used with all serial numbers of the same model, the effective serial
numbers are shown on the last line(s) of the description (before UOC).
(6) The UOC, when applicable (see paragraph 5, Special Information).
(7) In the Special Tools List section, the Basis of Issue (BOI) appears as the last line(s) in
the entry for each special tool, special TMDE, and other special support equipment.
When density of equipment supported exceeds density spread indicated in the BOI, the
total authorization is increased proportionately.
(8) The statement "END OF FIGURE" appears just below the last item description in
Column 6 for a given figure in Section II.
g.
QTY (Column (7)). The QTY (quantity per figure column) indicates the quantity of the item
used in the breakout shown on the illustration figure, which is prepared for a functional
group, subfunctional group, or an assembly. A "V" appearing in this column in lieu of a
quantity may vary from application to application.
4.
EXPLANATION OF COLUMNS (SECTION IV).
a.
NATIONAL STOCK NUMBER (NSN) INDEX.
(1)
STOCK NUMBER Column. This column lists the NSN by National Item Identification
Number (NIIN) sequence. The NIIN consists of the last nine digits of the NSN.
