TM 5-3810-307-24P
NSN
When using this column to locate an item,
(i.e., 5305-01-674-1467)
ignore the first 4 digits of the NSN. However,
NIIN
the complete NSN should be used when
ordering items by stock number.
(2)
FIG. Column. This column lists the number of the figure where the item is
identified/located. The figures are in numerical order in Section II and Section III.
(3)
ITEM Column. The item number identifies the item associated with the figure listed in the
adjacent FIG. Column. This item is also identified by the NSN listed on the same line.
b.
PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending
alphanumeric sequence (i.e., vertical arrangement of letter and number combination which places
the first letter or digit of each group in order A through Z, followed by numbers 0 through 9 and each
following letter or digit in like order).
(1)
PART NUMBER Column. Indicates the primary number used by the manufacturer
(individual, firm, corporation, or Government activity), which controls the design and characteristics
of the item by means of its engineering drawings, specifications standards, and inspection
requirements to identify an item or range of items.
(2)
FIG. Column. This column lists the number of the figure where the item is identified/located
in Section II and III.
(3)
ITEM Column. The item number is that number assigned to the item as it appears in the
figure referenced in the adjacent figure number column.
5.
SPECIAL INFORMATION.
Use the following subparagraphs as applicable:
USABLE ON CODE. The usable on code appears in the lower left corner of the Description
a.
column heading. Usable on codes are shown as "UOC: . . . applicable item description/
nomenclature. Uncoded items are applicable to all models. Identification of the usable on
codes used in the RPSTL are:
Code
Used On
JEJ
ATEC AT422T
b.
ASSEMBLY INSTRUCTION. Detailed assembly instructions for items source coded to be
assembled from component spare/repair parts are found in TM 5-3810-307-24. Items that
make up the assembly are listed immediately following the assembly item entry or reference
is made to an applicable figure.
c.
KITS. Line item entries for repair parts kits appear throughout Section II.
