TM 55-3810-01-165-14
Table 7-3. Application of Chain Tiedowns for Securing the 7-Ton Crane on Rail Flatcar Equipped with Chain Tiedown Assemblies
Application
Item
No. Required
A
Brake wheel clearance. Minimum clearance required is 6 inches above, in back of, and
both sides of, and 4 inches underneath the wheel.
-inch diameter alloy steel chain, proof-tested to at least 22,500 pounds attached to
4
B
tiedown provision.
c
1
-inch, 6 x 19, IWRC, wire rope. Complete loop located as shown between load sheave
and hook block. Tie back to prevent boom from creeping out. Secure with two -inch
clips (torque to 65 ft-lb).
D
2
Clips, -inch cable.
