TM10-3950-672-24-2
10mm
Assemble the oil cooler gaskets, element and cover.
Torque Value: 24 N
[18 ft-lbs]
m
Note
Be sure to remove the shipping plugs from the
element.
Fill the filter with clean lubricating oil and apply a light
coat of oil to the sealing gasket.
Install the oil filter.
Fill the coolant system and operate the engine to check
for leaks.
Stop the engine and check the coolant and oil level.
Oil Pan, Suction Tube and/or Gaskets -
Replacement
17mm and 10mm
Drain the oil and remove the pan and gasket.
5-131