TM 10-3950-672-24-2
Electric Fuel Shut Off Valve - Replacement
8mm
Remove the electrical wire(s) and complete the
following steps.
24mm
Caution: When removing the valve, be careful not to
drop the piston and spring.
Clean around the valve.
Replace the valve and connect the electrical wire.
Oil Pressure Switch - Replacement
Disconnect the wire from the sending unit.
Note: The sending units illustrated may differ from those
installed by the equipment manufacturer.
Reconnect the wire to the sending unit.
(Installed into Cast Iron)
16 N [12 ft-lbs]
m
(Installed into Aluminum)
10 N [7 ft-lbs]
m
5-157