TM 10-3950-672-24-2
Caution: Be sure to disengage the pin after locating
top dead center.
Use the timing pin to locate Top Dead Center for
Cylinder Number 1.
Valve Clearance Adjustment
Caution: Adjust the valves when the engine is cold -
below 60 [140F].
C
Four-Cylinder Engine
Step A
9/16 inch
Adjust the clearance for the valves shown in the
illustration.
Intake: 0.254mm [0.010 inch]
Tighten the locknut and check the clearance.
Note: The clearance is
correct when some friction is
felt when the feeler gauge is moved between the valve
stem and the rocker lever.
Caution: Be sure the timing pin is disengaged
before rotating the crankshaft.
Mark the pulley and rotate the crankshaft 360 degrees.
Torque Value: 24 N
[18 ft-lbs]
m
5-197