TM 10-3950-672-24-2
If an external pressure pump is not available, prime the
lubricating system according to the following procedure.
Fill the engine with oil to the high level mark on the
dipstick.
Fill the lubricating oil filters with clean 15W-40 oil.
Screw the filters onto the filter head fitting until the
gasket contacts the filter head surface.
Use oil filter wrench, Part No. 3375049, to tighten the
filters an additional 3/4 to 1 turn.
To make sure the lubricating oil pump is providing
adequate oil to the engine, first disconnect any wires
5-324