TM 10-3950-206-12
4. Valve
5. Head
6. Seal
7. Element
8. Spring
9. Body.
10. Washer
11. Bolt
Figure 4-44.-Continued.
(4) Remove retaining ring (1), washer (2),
spring (3), and valve (4) from filter head (5).
c. Cleaning and Inspection.
(1) Clean all parts in an approved cleaning
solvent and dry thoroughly.
(2) Inspect sealing edges of body and head for
damage or deformation.
(3) Inspect valve for burrs and pitting.
(4) Replace any parts found defective.'
d.
Reassembly.
Reassemble in reverse of
instructions for disassembly.
e. Installation. Install the filter in reverse of
removal.
1. Retainer ring
2. Washer
3. Spring
Figure 4-44. Transmission oil filter, exploded view.
4-48
