Figure 1-1. Crane-shovel basic unit, non-winterized, right rear view, and shipping dimensions.
therefore in this manual the component position on
equipped with three heaters (fig. 1-3) mounted on rear
engine will be described in relation to radiator as front
of cab, just above the counterweight. Tubing and ducts
end, or flywheel as the rear end. As an example, on
direct flow of heated air to operator's compartment and
Model 687C-18-ES the starting motor is at rear on left
defrosters; engine, water and oil, and battery
side, the generator at front on 'right side. On Model
compartment. A separate fuel tank supplies fuel to
D333TA, the alternator is at front on left side, and
these heaters.
starting motor at rear on right side. The cylinders are
1-4. Identification and Tabulated Data
numbered from front to rear.
a. Identification. The crane-shovel basic unit has
f. Winterization.
Winterized
units
are
eleven major identification plates which this
1-2
