Idle speed ................................. 500 rpm
located on right front side of revolving frame cab. It
Rotation at flywheel end ............ Counterclockwise
specifies position of slings for loading.
Fire order.................................. 1-6-2-4-3-5
(7) Heater operating instruction plate. This
Governed full load speed .......... 1,800 rpm
plate is on all winterized models, located on inside of
Weight...................................... 1,900 lbs (pounds)
door to operator's compartment below the door glass. It
(b) Model D33STA.
provides operation instructions and location of all
Manufacturer ............................ Caterpillar Corp.
heaters.
Model ....................................... D333TA
(8) Personnel heater identification plate
Bore ......................................... 4.5 in. (inch)
(model E-510). This plate is mounted on inside of
Stroke....................................... 5.5 in.
heater compartment door. Heater compartment is at
Number of cylinders .................. 6
right rear of cab, just above counterweight. It gives
Displacement............................ 522 cu in.
manufacturers name, model number, volts, and output
Horsepower (HP) ...................... 190 HP without fan
Idle speed ................................. 600 rpm
capacity in BTU's.
Governed full load speed .......... 2,000 rpm
(9) Engine heater identification plate (model
(3) Dimensions and weights.
E-511), This plate is located inside door of heater
(a) Overall length.
compartment. Heater compartment is just to left of
(Less boom) ............................. 19 ft 6 in.
heater fuel tank at rear of cab, above counterweight. It
(With 60 ft crane boom) ............ 67 ft 5 in.
gives the manufacturer's name, model number, volts,
(With 50 ft crane boom and
and output capacity in BTU's.
15 ft jib)................................. 80 ft 4% in.
(10) Battery heater identification plate (model
(With 50 ft dragline boom) ........ 67 ft 5 in.
MH15-B2). This plate is located on top of battery
(With 50 ft clamshell
heater, which is in compartment at left rear of cab just
boom) ................................... 67 ft 5 in.
above counterweight. It gives manufacturer's name,
(With 24 ft shovel boom)........... 47 ft 7 in.
model number, volts, and output capacity in BTU's.
(With 23 ft backhoe boom)........ 41 ft 1 in.
(b) Overall width.
(11) Transportation data plate. This plate is
(27 in. shoes)...................... 11 ft 8% in.
located directly below the loading identification plate ((6)
(c) Overall height.
above.) It specifies dimensions, cubage, tonnage,
(Less boom and gantry) ............ 12 ft 9 in.
height, length, and weights of the crane-shovel unit.
(With 23 ft backhoe boom)........ 21 ft
b. Tabulated Data.
(d) Shipping cubage.
(1) General.
(Basic unit) ............................... 2,738 cu ft
(a) Crane-shovel basic unit, model
With 50 ft boom)....................... 9,675 cu ft
855BG-2.
(With 50 ft boom and 15 ft
Manufacturer ............................ Harnischfeger Corp.
jib) ........................................ 11,600 cu ft
Model ....................................... 855BG-2
(With 50 ft dragline boom) ........ 9,675 cu ft
Designed for use as .................. Backhoe, clamshell, crane,
(With 50 ft clamshell boom) ...... 9,675 cu ft
dragline, piledriver, and
(With 24 ft shovel boom)........... 6,775 cu ft
shovel
(With 23 ft backhoe boom)........ 9,725 cu ft
(b) Crane-shovel
basic
unit,
model
(e) Operating weights (approximate).
855BG-3.
(Basic unit) ............................... 101,025 lbs
Manufacturer ............................ Harnischfeger Corp.
(Backhoe) ................................. 119,290 lbs
Model ....................................... 855BG-3
(Crane) ..................................... 106,400 lbs
Designed for use as .................. Backhoe, clamshell, crane,
(Shovel).................................... 118,600 lbs
dragline, piledriver, and
(Clamshell) ............................... 107,000 lbs
shovel
(Dragline) ................................. 107,500 lbs
(2) Engines.
(Piledriver) ................................ 118,600 lbs
(a) Model 687C-18-ES,.
(f) Heater dimensions.
Manufacturer ............................ P
& H Diesel Division,
Battery heater:
Harnischfer Corp.
Width........................................ 6 in.
Model ....................................... 687C-18-ES
Length ...................................... 13 1/16 in.
Cycle ........................................ 2
Height....................................... 10 in.
Compression ratio..................... 16 to 1
Personnel heater:
Displacement ............................ 522 cu in. (cubic inches )
Width........................................ 8 in.
Number of cylinders .................. 6
Length ...................................... 25 in.
Cooling ..................................... Liquid
Height....................................... 12 in.
Horsepower .............................. 190 HP (horsepower) at
Engine heater:
1,700 rpm (revolutions per
Width........................................ 8 in.
minute)
Length ...................................... 23 in.
Height....................................... 12 in.
1-5
