(15) Batteries (2)
(10) Alternator regulator (model DSKSTA).
Manufacturer ............................ Unspecified
Manufacturer ............................ Delco Remy
Volts (each battery)................... 12 (hook up in series for 24
Model ....................................... 9000591
VDC electrical system)
Circuit ....................................... A or B (normally B)
Polarity ..................................... Either
(16) Specific nut and bolt torque data.
(A circuit for positive
(a) For model 687C-18-ES.
ground, B circuit for
Starter motor mounting ............. 71-75 ft-lbs
negative ground)
Generator mounting .................. 35-39 ft-lbs
Voltage setting range ................ 27.5 to 28.5 VDC (with
Exhaust manifold nut ................ 50 ft-lbs
adjusting screw at "0")
Fuel injector mounting nut......... 15-20 ft-lbs
(11) Fuel filter (primary).
Fuel injector stud ...................... 15 ft-lbs
(a) For model 687C-18-ES.
Muffler mounting....................... 83-93 ft-lbs
Pulley mounting ........................ 30-35 ft-lbs
Manufacturer ............................ Zenity
Fan mounting ........................... 15-19 ft-lbs
Model ....................................... F471-2X712
Water manifold mounting.......... 35-39 ft-lbs
(b) For model D3SSTA. None used.
(b) For model D33STA.
(12) Fuel filter (secondary).
Fuel line not torque ................... 25-35 ft-lbs
(a) For model 687C-18-ES.
Valve cover retaining nut........... 12-18 ft-lbs
Manufacturer ............................ Fram
Glow plug ................................. 8-12 ft-lbs
Type ......................................... Cartridge
(17) General torque data.
The following
Model ....................................... F1125-AP811
general torque values are to be used unless otherwise
(b) For model D333TA.
specified.
Manufacturer ............................ Caterpillar
Torque ft-lbs, for
Torque ft-lbs for
Model ....................................... 9H4729
std. Heat treated
special heat treated
(13) Air cleaner.
Threads
SAE grade 5 min-
SAF grade 8 min-
(a) For model 687C-18-ES (on model
Size
per inch
tensile strength
tensile strength
120,000 P.S.I.
150,000 P.S.I
855BG2).
20
6--8
9--11
Manufacturer ............................ Donaldson
28
8--10
10--12
Model ....................................... Oil bath
5/16
18
15--18
17--20
Type ......................................... A14111
24
17--20
19--23
(b) For model 687C-18-ES (on model
3/8
16
26--32
36--43
24
33--40
41--49
855BGs).
7/16
14
42--50
54--65
Manufacturer ............................ Donaldson
20
50--60
64--77
Type ......................................... Oil bath
13
67--80
81--97
Model ....................................... TFA14-1790
20
83--100
96--115
(c) For model DSS3TA.
9/16
12
85--100
103--123
18
100--120
122--146
Manufacturer ............................ Caterpillar
5/8
11
117--140
164--192
Type ......................................... Dry
18
134--160
193--225
Model ....................................... 5L7680
10
180--210
284--325
(14) Engine lubricating oil filter.
16
215--250
337--385
(a) For model 687C-18-ES.
Manufacturer ............................ Purolator
(18) Specific gravity temperature corrections
Model ....................................... WF500 (Assembly 64776)
Filter element ............................ PC500 (heavy duty senior
type)
corrections.
(b) For model DS3STA.
(19) Cable lengths, diameters, and use. Refer
Manufacturer ............................ Caterpillar
to table 1-2 for cable lengths for front end attachment to
Model ....................................... 9M530
be used.
Filter element ............................ 5S484 (disposable type)
(20) Crane and jib working ranges. Refer to
Table 1-1. Specific Gravity Temperature Corrections for Batteries.
Cranking
Temperature in degrees F
power
-65
-40
-20
-10
0
+20
+40
+80
+100
+110
+120
available
50%
1.277
1.267
1.259
1.2655
1.251
1.243
1.236
1.220
1.213
1.209
1.205
58.3%
1.287
1.277
1.269
1.265
1.261
1.253
1.246
1.230
1.223
1.219
1.215
66.6%
1.297
1.287
1.279
1.275
1.271
1.263
1.256
1.240
1.233
1.299
1.225
75%
1.307
1.297
1.289
1.285
1.281
1.273
1.266
1.250
1.243
1.239
1.235
83.3%
1.317
1.307
1.299
1.295
1.291
1.283
1.276
1.260
1.252
1.248
1.245
91.6%
1.327
1.317
1.309
1.305
1.
||content||
1.294
1.286
1.270
1.262
1.258
1.255
100%
1.338
1.328
1.320
1.316
1.312
1.304
1.296
1.280
1.272
1.268
1.265
1-7
