Figure 3-4. Backplate. removal and Installation.
c. Reassembly and Installation.
(3) Inspect take-off housing for cracks, or
other defects. Inspect all shafts for alinement. Inspect
(1) Refer to sheets 1 and 2 of figure
3-5 and
broken teeth. Inspect mounting hardware for burs,
assemble the power take-off and clutch in
reverse
stripped threads, or other defects.
numerical order.
(4) Inspect transfer case, sprockets, chain,
(2) Install unit by reversing procedure
in steps
and backplate for wear or other defect.
(1) through (10) of a above.
(5) Repair by welding cracks or breaks.
(3) Lubricate in accordance with LO
5-3810-
Repair enlarged key ways by filling in with weld and
201-12.
recutting to proper size. Replace worn or defective
components, or defective mounting hardware.
AGO 20051A
3-8
