Figure 4-6. Jackshaft (horizontal swing shaft), installed view.
(3) Remove six nuts (48), lockwashers (49), and
(5) Remove bearing housing (52), bearing (51),
bolts (58) from adapter ring (57) and bearing retainer
bearing retainer (50), and spacer (51) from shaft (38).
(50).
(6) Remove two nuts (26), lockwashers (25),
(4) Remove adapter ring (57), gasket (56), shims
capscrews (16), and shifter collar (14) from clutch shifter
(54), and seal (53), from bearing housing (52).
(16).
4-8
