1
Shaft (2 rqr)
13
Bearing (2 rqr)
25
Nut (8 rqr)
2
Lever (2 rqr)
14
Flatwasher (2 rqr)
26
Bolt (2 rqr)
3
Lockwasher (10 rqr)
15
Cam level (2 rqr)
27
Lever (2 rqr)
4
Nut (14 rqr)
16
Capscrew (2 rqr)
28
Lever (2 rqr)
5
Lever (2 rqr)
17
Shaft (2 rqr)
29
Connecting link (2 rqr)
6
Collarset (4 rqr)
18
Key (2 rqr)
30
Lever (2 rqr)
7
Lever (2 rqr)
19
Key (2 rqr)
31
Bolt (8 rqr)
8
Pin (2 rqr)
20
Key (4 rqr)
32
Yoke (2 rqr)
9
Cotterpin (2 rqr)
21
Flatwasher (6 rqr)
33
Setscrew (4 rqr)
10
Clevis (2 rqr)
22
Spacer (8 rqr)
34
Capscrew (2 rqr)
11
Bearing (4 rqr)
23
Blocks (2 rqr)
35
Key (6 rqr)
12
Roller (2 rqr)
24
Spring (2 rqr)
36
Setscrew (4 rqr)
Figure 5-3. Steering and brake lever shaft, exploded view.
(2) Remove shaft (5) from crawler (para 5-4).
(1) Install washers (21) and setscrews (33) in
levers (2 and 5).
b. Disassembly.
(2) Insure that keys (18 and 19) are in shaft
(17) then place left and right hand levers (5 and 2), collar
(1) As shaft is driven out, lift off left and right
set (6), and lever (27) on shaft (17).
hand levers (2 and 5, fig. 5-3).
(2) Remove pin (8) connecting levers (2 and
e. Installation.
5) to clevis (10) then lift levers out.
(3) Separate setscrews (33) and washers (21)
4c(4) above) and install pin (8, fig. 5-3) which connects
from lever.
lever (7) to clevis (10).
c. Cleaning, Inspection, and Repair. Refer to
(2) Install shifter yoke (6, fig. 5-2) around jaw
clutch on horizontal propelling shaft, then install pin (8,
similar manner.
(3) Secure nuts (3, fig. 5-2) on lever (2), and
setscrew (10) on collar (7).
d. Reassembly.
AGO 20051A
5-3
