(5) Remove cotterpin (11) and pin (26) then
5-6. Propelling Bakes and Brake Levers
separate lever (23) from clevis (24). Remove nuts (31
and 29) from bottom of clevis (24).
a. Remove and Installation. Remove or install
(6) Separate clevis (24) and trunnion (30)
propelling brakes and brake levers (TM 5-3810-201-12).
from lever (82).
(7) If necessary to replace lining, cut rivets (2,
b. Disassembly and Reassembly.
3, 4, and 5), then remove lining (1) from brake bands (6).
(1) Remove tension springs (156, fig. 5-4) and
(8) Reassemble propelling brakes and levers
links (12 and 20) from bracket (16).
by reversing procedure in steps (1) through (7) above.
(2) Remove cotterpin (11), washer (8) and pin
(10), then separate link (7) from lever (9).
c. Cleaning, Inspection, and Repair. Refer to
(3) Remove cotterpins (27) and pin (28) from
levers (23 and 32).
propelling brakes and levers in a similar manner.
(4) Remove cotterpins (11) and pin (22).
Separate lever (23) from lever (9).
1
Lining (2 rqr)
15
Tension spring (2 rqr)
29
Nut (2 rqr)
2
Rivet (6 rqr)
16
Bracket
30
Trunnion (2 rqr)
3
Rivet (22 rqr)
17
Cotterpin (8 rqr)
31
Nut (2 rqr)
4
Rivet (6 rqr)
18
Pin (2 rqr)
32
Lever (2 rqr)
5
Rivet (8 rqr)
19
Washer (12 rqr)
33
Bearing (2 rqr)
6
Brake hand (2 rqr)
20
Link (2 rqr)
34
Pin (8 rqr)
7
Link (4 rqr)
21
Pin (2 rqr)
35
Nut (2 rqr)
8
Washer (2 rqr)
22
Pin (2 rqr)
36
Nut (2 rqr)
9
Lever (2 rqr)
23
Lever (2 rqr)
37
Washer (2 rqr)
10
Pin (2 rqr)
24
Clevis (2 rqr)
38
Spacer (2 rqr)
11
Cotterpin (2 rqr)
25
Bearing (4 rqr)
39
Spring (2 rqr)
12
Link (2 rqr)
26
Pin (2 rqr)
40
Bolt (2 rqr)
13
Nut (2 rqr)
27
Cotterpin (4 rqr)
41
Lever (2 rqr)
14
Bolt, hook (2 rqr)
28
Pin (4 rqr)
42
Lever (2 rqr)
Figure 5-4. Propelling brake and levers, exploded view.
AGO 20051A
5-4
