generator
away from engine until belt will depress 1/2
inch at a
point midway between pulleys.
c. When adjustment is correct, tighten
nut and
capscrew to hold generator in place.
Recheck
adjustment.
3-22. Alternator Drive Belt Adjustment (Engine
Model D333TA Only)
belts. When two belts are used, they must be replaced
in matched sets.
method used for generator drive belt (para 3-21).
3-23. Chain Case Fill Cap and Breather Service
Service chain case fill cap and breather as described in
Figure 3-16. Fan drive belt adjustment (sheet 2 of 2)
3-21. Generator Drive Belt Adjustment (Engine
3-24. Power Take-Off Breather Service
Model 687C-18-ES Only)
Service power take-off breather as described in
strap.
1
Locknut
6 Setscrew
Figure 3-17. Generator drive belt adjustment.
2
Spring
7 Cylinder
3
Shifter Collar
8 Clevis
4
Washer
9 Link
5
Locknut
10 Spring
Figure 3-18. Swing clutch shifter mechanism.
3-29
