3-81. Starter Motor
(3) Remove three nuts, washers, and capscrews,
then remove voltage regulator from mounting bracket.
remove items (2) and (13) through (18)
(4) Install in reverse order.
1
Nut
11
Bolt, washer and nut (2)
2
Electrical lead
12
Relay solenoid
3
Nut
13
Nut
4
Electrical lead
14
Nut
5
Nut
15
Electrical lead
6
Electrical lead
16
Nut (3)
7
Nut
17
Lockwasher (8)
8
Electrical lead
18
Starter motor
9
Electrical lead
19
Screw and nut (2)
10
Electrical lead
20
Inspection band
Figure 3-64. Starter motor relay solenoid and inspection band removal and installation.
3-74
