Figure 3-119. Panels and swinging door, removal and installation.
3-160. Sliding Doors
b. Cleaning, Inspection and Repair.
Clean,
inspect, and repair panels in manner similar to that
described for doors in paragraph 3-159.
a. Removal and Installation.
(1) Refer to figure 3-120 and unhook latch.
3-162. Left Hand Front Panel
(2) Remove two roller bearings and washers
from pins then lift right rear sliding door from guides.
Refer to paragraph 3161 and remove or install left hand
(3) Remove left rear sliding door in similar
front panel in a similar manner.
manner.
(4) Install in reverse order.
3-163. Left Front Panel Door
b. Cleaning, Inspection and Repair.
a. Removal and Installation.
(1) Clean door with an approved cleaning
(1) Refer to figure 3-121 and remove left
solvent and dry thoroughly.
front panel door.
(2) Visually inspect bearings for excessive
(2) Install in reverse order.
wear, door for bends, cracks, or other damage.
(3) Repair by straightening bends, welding
b. Cleaning, Inspection and Repair.
Clean,
cracks, or replacing defective bearings or door.
inspect, and repair left front panel door in manner
similar to that described in paragraph 3-159.
3-161. Center Side Panel
a. Removal and Installation.
3-164. Rear Cab Panel
(1) Refer to figure 3-119 and remove center
panel from left hand side.
Refer to figure 3-121 and remove or install the rear cab
(2) Install in reverse order.
panel.
3-125
