3-165. Right Rear Side Panel
(2) Visually inspect for dents, cracks, or bent
Remove or install right rear side panel in manner similar
louvers. Inspect mounting hardware for burs, stripped
to that described for louver panel (para 3-166).
threads, or other damage.
(3) Repair by straightening bends and dents,
3-166. Louver Panel
or welding cracks. Replace defective mounting
hardware, or panel.
a. Removal and Installation.
3-167. Right Hand Side Center Cab Panel
(1) Refer to figure 3-119 and remove louver
Remove or install right hand side center cab panel in
panel from left hand side of cab.
similar manner as described for louver panel (para 3-
(2) Install in reverse order.
166).
b. Cleaning, Inspection and Repair.
3-168. Operator's Seat
(1) Clean panel in an approved
cleaning
Refer to figure 3-122 and remove operator's seat. Install
solvent and dry thoroughly.
in reverse order.
3-126
