TM 5-3810-206-35
CHAPTER 2
GENERAL MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
2-1.
Special Tools and Equipment
2-3.
Specially Designed (Fabricated) Tools and
Equipment
The special tools required to perform direct support,
general support and depot maintenance on the crane-
The specially designed tools and equipment illustrated in
shovel basic unit are listed in tables 2-1 and 2-2 and in
appendix C of TM 5-3810-206-12. References and
for general support maintenance personnel performing
illustrations indicating the use of these tools are listed in
maintenance on the engine model D333TA. The tools
the table. No special equipment is required by direct
and equipment listed in table 2-3 are not available for
support, general support, or depot maintenance
issue, but must be fabricated by qualified general
personnel for performing maintenance on the crane-
support maintenance personnel.
shovel basic unit.
2-2.
Direct Support, General Support, and Depot
Maintenance Repair Parts
Direct and general support and depot maintenance
repair parts are listed and illustrated in TM 5-3810-206-
35P.
(Figure
2-1
Sheet
1
of
7)
(Figure
2-1
Sheet
2
of
7)
(Figure
2-1
Sheet
3
of
7)
(Figure
2-1
Sheet
4
of
7)
(Figure
2-1
Sheet
5
of
7)
(Figure
2-1
Sheet
6
of
7)
(Figure
2-1
Sheet
7
of
7)
Figure 2-1. Specially designed (fabricated) tools (sheet 1 of 7).
2-1
