TM 5-3810-206-35
KEY to fig. 4-7:
1
Fitting (2 rqr)
17
Key
32
Bevel gear
48
Nut (6 rqr)
2
Bearing retainer
18
Clutch spider
(2 rqr)
49
Lockwasher (6 rqr)
3
Nut (2 rqr)
R.H.
33
Spacer (2 rqr)
50
Bearing retainer
4
Cotterpin (2 rqr)
19
Seal (2 rqr)
34
Capscrew (4 rqr)
51
Bearing (2 rqr)
5
Washer (2 rqr)
20
Clutch drum
35
Center bearing
52
Bearing housing
6
Bearing
(2 rqr)
housing
53
Seal
7
Setscrew
21
Packing (2 rqr)
36
Key (2 rqr)
54
Shim (AR)
8
Bearing housing
22
Seal (2 rqr)
37
Key
55
Spacer
9
Spacer
23
Bearing (4 rqr)
38
Shaft
56
Gasket
10
Spur gear
24
Pin (4 rqr)
39
Clutch spider
57
Adapter ring
11
Spacer
25
Lockwasher
L.H.
58
Bolt (6 rqr)
12
Washer (2 rqr)
(4 rqr)
40
Spacer
59
Gasket (2 rqr)
13
Gasket (2 rqr)
26
Nut (4 rqr)
41
Bearing outer race
60
Adapter ring
14
Shifter collar
27
Pin (2 rqr)
42
Shim
61
Adapter ring
(4 rqr)
28
Cotterpin
43
Retaining ring
62
Lockwasher (8 rqr)
15
Capscrew (4 rqr)
(8 rqr)
44
Nut (4 rqr)
63
Pin (2 rqr)
16
Clutch shifter
29
Cam (2 rqr)
45
Lockwasher (4 rqr)
64
Washer (2 rqr)
(2 rqr)
30
Spacer (2 rqr)
46
Fitting
65
Capscrew (8 rqr)
31
Key (2 rqr)
47
Bushing
Figure 4-7. Horizontal swing shaft (jackshaft), exploded view.
(21) Remove clutch spider (18), oil seal (19),
(27) Remove pin (63) and washer (64) from
clutch drum (20), O-ring (21), and oil seal (22) from shaft
shifter collars (14).
(38), then remove pins (24) from clutch spider.
(28) Remove fitting (1) from bearing retainer (2).
(22) Remove bearing (23) and spacer (30) from
c. Cleaning, Inspection, and Repair.
shaft (38).
(1) Clean all metal parts and dry thoroughly.
(23) Use press and remove bevel gear (32),
(2) Visually inspect shifter, shifter collars,
bearing (23), and spacer (33) from shaft (38).
(24) Remove keys (36) and (37), then slide
excessive wear, chipped teeth, scoring, burs, or other
center bearing housing (385) off shaft (38).
defect. Inspect clutch drums for cracks, breaks, or wear.
(25) Remove retaining ring (43), bearing inner
Inspect brake or clutch shoe linings for wear. Replace
race (42), and bearing outer race (41) from center
linings when worn to within 1/16 in. of rivet heads.
bearing housing (35).
Inspect shaft for wear and straightness.
Inspect
(26) Remove fitting (46) and bushing (47) from
mounting hardware for damage or defect.
bearing retainer (50).
4-9
