TM 5-3810-207-20/TO 36C23-3-37-12
Figure 40. Carburetor, removal and installation.
(2)
Operate the primer pump several times.
If no fuel appears, primer pump is
defective or fuel line is clogged. Replace
a defective pump and clean fuel line.
110. Fuel Lines and Fittings
a.
Removal. Tag, disconnect, and remove all fuel
lines and fittings as illustrated on figure 44.
b.
Cleaning and Inspection.
(1)
Clean all fuel lines and fittings with an
approved cleaning solvent.
(2)
Inspect all lines and fittings for breaks,
cracks, and other damage. Replace all
defective lines and fittings as necessary.
c.
Installation. Refer to identification tags placed
on lines and fittings and install lines and fittings in their
proper positions as illustrated on figure 44.
111. Throttle Control Lever
a.
Removal. Remove throttle control lever as
instructed on figure 45.
b.
Cleaning and Inspection. Clean and inspect the
throttle lever and cable for breaks and other damage.
Replace defective throttle control lever and cable.
c.
Installation. Install throttle control lever as
illustrated on figure 45.
70
