TM 5-3810-207-20/TO 36C23-3-37-12
Figure 55. Cable housing panel, removal and installation.
127. Operator's Seat
a.
Removal. Remove the operator's seat as
instructed on figure 57.
b.
Disassembly. Disassemble the operator's seat as
illustrated on figure 58.
c.
Cleaning, Inspection, and Repair.
(1)
Clean all parts with an approved cleaning
solvent.
(2)
Inspect the seat and backrest for torn, bent,
or broken conditions. Replace damaged
seat or backrest.
(3)
Inspect all other parts for breaks, bends,
and other damage. Repair or replace as
necessary.
d.
Reassembly. Reassemble the operator's seat as
illustrated on figure 58.
e.
Install the operator's seat as illustrated on figure
57.
87
