TM 5-3810-207-20/TO 36C23-3-37-12
Figure 189. Propeller shaft and universal joint, removal and disassembly, exploded view.
308. Transmission Control Rod
a.
Removal and Disassembly. Remove and
disassemble the transmission control rods in the
numerical sequence as illustrated on figure 190.
b.
Cleaning, Inspection, and Repair.
(1) Clean all parts with an approved
cleaning solvent.
(2) Inspect all parts for excessive wear,
bends, breaks, and other damage.
Replace or repair all defective parts as
necessary.
c.
Reaasembly and Installation.
(1) Reassemble and install the control rod
assembly
in
the
reverse
of
the
numerical sequence as illustrated on
figure 190.
(2) Service the propeller shafts (LO 5 3810-
207-20).
309. Transfer Case Shifter Levers and Controls
a.
Removal. Remove the shifter levers and
controls as instructed on figure 191.
b.
Cleaning, Inspection, and Repair.
(1) Clean all parts with an approved
cleaning solvent.
(2) Inspect all parts for breaks, bends, and
other damage. Repair or replace all
parts as necessary.
c.
Installation. Install the shifter levers and
controls as illustrated on figure 191.
243
