Fan and Fan Belt

Section III. CRANE ENGINE COOLING SYSTEM

Figure 33. Hose, lines, and fittings, removal and installation

TM-5-3810-207-20 Crane-Shovel Basic Unit Truck Mounted: 20 Ton 3/4 Cu.Yd. Gasoline Driven (Quickway Model M-200) Non-Winterized Manual
Page Navigation
73

TM 5-3810-207-20/TO 36C23-3-37-12 A Lower hose, lines, and fittings, installed view Figure 33. Hose, lines, and fittings, removal and installation. 100. Fan and Fan Belt a. Removal. (1) Remove the radiator shroud and fan guard (par. 99). (2) Remove the fan and fan belt as instructed on figure 37. b. Cleaning and Inspection. (1) Clean the fan and fan belt with an approved cleaning solvent. (2) Inspect the fan for breaks, bends, and other damage. Replace defective fan. (3) Inspect the fan belt for breaks, fraying, cracks, and other damage. Replace defective fan belt. c. Installation. (1) Install the fan belt and fan as illustrated on figure 37. (2) Install the radiator shroud and fan guard (par. 99). 101. Water Pump Assembly a. Removal. (1) Drain the cooling system (TM 5-3810-207- 10). (2) Remove the fan guard (par. 99). (3) Remove the generator belt (par. 71). (4) Remove the fan and fan belt (par. 100). 60

Privacy Statement
Press Release
Contact