Figure 20. Crane engine oil pump, removal and installation.
(2) Install the crane engine cylinder head
(3) Install the crane engine oil pan (par. 97).
Section XV. CRANE ENGINE FLY WHEEL AND FLYWHEEL HOUSING
(1) Remove the starter (TM 5-3810-20720).
106. General
The crane engine flywheel is attached to the
(2) Remove the crane engine (par. 45).
crankshaft flange at the rear of the crane engine. A
flywheel ring gear that meshes with the starter pinion to
(3) Remove the crane engine clutch (par. 84).
turn the engine over is shrunk on the forward surface of
the flywheel. The housing also bolts to the clutch
(4) Remove
the flywheel
and flywheel
housing.
housing as instructed on figure 24.
107.
Crane Engine Flywheel and Flywheel Housing
b. Disassembly. Disassemble the flywheel and
Removal and Disassembly
ring gear in numerical sequence as illustrated
on figure 25.
a. Removal.
TAGO 5030A
58
