(e) For model 2385 engage house lock (fig. 2-
(3) Remove cables; clean, lubricate, and identify
the cables and store.
19).
(4) Move the crane away from the crane bx.,n
NOTE
attachment.
For long distance moves, the crane boom
d. Utility Blade RemovaL Upon occasion the utility
may remain installed but it may be desirable
blade assembly may be removed to facilitate handling or
to remove it. If a clamshell or dragline
clearances. Refer to figure 1-3.
bucket is used, it must be removed and
2-4. Reinstallation After Movement
transported by truck or trailer.
a. Crane Boom Installation. Install crane boom if
applicable (para 2-2).
c. Crane Boom Removal.
b. Utility Blade Installation. Install utility blade if
(1) Lower the boom to a horizontal position and
applicable.
build up cribbing under the boom as illustrated in figure
2-1.
(2) Use wedges or jacks to relieve weight from the
boom footpins. Remove the boom footpins (fig. 2-2).
Section III. CONTROLS AND INSTRUMENTS
2-5. General
This section describes, locates, illustrates, and furnishes
2-6. Carrier Controls and Instruments
the operator/crew sufficient information about the
(Model 2380)
controls and instruments for proper operation of the
carrier and crane. Paragraph 2-6 list the carrier controls
a. The controls and instruments for the model 2380
and instruments for the model 2380, paragraph 2-7 list
carrier are illustrated in figure 2-14, sheets 1 and 2.
the carrier controls and instruments for the model 2385,
and the crane controls and instruments for both models
are listed in paragraph 2-8.
2-15
