b. Cleaning and Inspection.
(2) Install instrument panel as illustrated in
(1) Clean all parts.
(2) Inspect for defects or damage.
(3) Replace defective or damaged parts as re-
4-87. Oil Pressure Sending Unit, and Pressure
quired.
Switch
c. Reassembly and Installation.
a. Removal. Remove oil pressure sending unit and
(1) Reassemble
instrument
panel
as
pressure switch as illustrated in figure 4-82.
illustrated in figure 4-80.
Figure 4-82. Crane engine oil pressure sending unit and pressure switch, removal and installation.
4-86
