d. Cleaning and Inspection.
e. Control Valves Reassembly. Reassemble the
(1) Clean all parts with an approved cleaning
control valves as illustrated in figure 4-116.
f. Installation. Install the manifold, control valves,
solvent and dry thoroughly.
(2) Inspect for cracks, stripped threads,
and related parts as illustrated in figure 4-114 or 4-115.
g. Dozer Control Valve Stop Adjustment. Adjust
corrosion or other defects.
(3) Replace all gaskets, and damaged or
screw socket head stop and angle stop (fig. 4-117) to
defective parts.
stop dozer control lever just before spool reaches the
end of strokes (lower and raise).
Figure 4-117. Control valve stop adjustment.
4-121
