4-132. Brake Valve
a. Removal
(1) Relieve pressure from system.
(2) Remove the brake valve as illustrated in
Figure 4-122. Relay valves, removal and installation.
Sheet 1 of2.
Figure 4-121. Brake valve, removal and installation
b. Cleaning and Inspection.
(1) Clean and dry thoroughly.
(2) Inspect for cracks or other defects. Replace
a defective brake valve.
c. Installation. Install brake valve as illustrated in
4-133. Moisture Ejector Drain Valves
a. Removal
(1) Relieve pressure from system.
(2) Remove the drain valves as illustrated in
figures 4-119 o 4-120.
b. Cleaning and Inspection.
(1) Clean valves with an approved cleaning
solvent and dry thoroughly.
(2) Inspect for cracks, damaged threads, or
other defects. Replace defective drain valves.
Figure 4-122. Relay valves, removal and installation.
c. Installation. Install drain valves as illustrated in
Sheet 2 of2.
figures 4-119 or 4-120.
4-134. Relay Valves
a. Removal
(1) Relieve system pressure.
(2) Remove relay valves as illustrated in figure 4-
122.
4-126
