3-40. Installation
b. Remove air intake manifolds as illustrated on
a. Install air intake manifolds as illustrated on
c. Remove exhaust manifold as illustrated on
middle, to 30 32 ft-lbs in increments of 10 ft-lbs.
b. Install air connections, hose clamps, and
3-39. Cleaning, Inspection and Repair
mounting hardware as shown in figure 3-21.
a. Clean all parts with an approved cleaning
c. Install exhaust manifolds as illustrated on
solvent and dry thoroughly.
b. Inspect for cracks, breaks and damaged or
lbs. increments.
defective hardware.
c. Replace damaged or defective parts.
Section XIII. CARRIER ENGINE ROCKER COVERS AND PUSH ROD CAVITY COVERS
Remove push rod cavity covers as illustrated on figure 3-
3-41. Removal
Remove rocker covers (TM 5-3810-232-12).
Figure 3-22. Push rod cavity cover, removal and installation.
3-42. Cleaning, Inspection and Repair
3-43. Installation
a. Clean all parts with an approved cleaning
Install push rod cavity cover as illustrated on figure 3-22
and rocker covers (TM 5-3810-232-12).
solvent and dry thoroughly.
b. Inspect for cracks, breaks, or other damage.
c. Repair or replace defective parts.
3-41
