e. Connect fuel and drain lines (TM 5-3810-232-
12).
2)
Section XIII. CRANE ENGINE VIBRATION DAMPER
4-
4-45. Removal
a Remove radiator (TM 5-3810-232-12).
b Remove vibration damper and adapter hub as
illustrated in figure 4-10.
B--Adapter hub removal
Figure 4-10.(2)--Continued
4-46.
Cleaning, Inspection and Repair
a Clean damper exterior with a cloth dampened
with an approved cleaning solvent.
b Inspect damper for dents and cracks. Shake
A-Vibration damper removal
damper from front to rear. Movement of loose pieces will
be felt or heard if fluid has been lost. Replace a
Figure 4-10. (1) Vibration damper, removal and
damaged or defective damper.
installation.
C. Inspect adapter hub for cracks, breaks or ,. other
damage. Repair or replace a defective hub.
4-17
