Figure 5-3. Propeller shaft and universal joint, removal disassembly, exploded view.
c.
Installation.
(2) Remove the rear axle, the front axle and
the fan drive, propeller shafts in a similar manner.
(1) Install the torque converter transmission
b. Cleaning, Inspection and Repair.
propeller shaft in the reverse of the numerical sequence
(1) Clean all parts with an approved
as illustrated on figure 5-3.
cleaning solvent.
(2) Install the front axle, the rear axle, and
(2) Inspect the spider bearings for
the fan drive, propeller shafts in a similar manner.
excessive wear and other damage. Replace spider
bearings as necessary.
Section III. CARRIER TRANSMISSION CONTROL
transmission directional control lever, the transmission
5-5. General
gear range selector and the utility blade control lever.
The carrier transmission controls, which consist of four
5-6. Removal and Disassembly
control levers, the control linkage, the lock-up valve and
the actuator valve, provides the control mechanism with
which the carrier transmission is made to operate. The
Remove and disassemble the transmission control as
four control levers are the front axle declutch control, the
illustrated on figure 5-4.
5-10
