b. Disassembly.
Refer to figure 5-37
and
5-28. Heat Exchanger Assembly
disassemble the heat exchanger as illustrated.
a. Removal. Remove heat exchanger (TM 5-3810-
232-12).
1
Clamp hose
16
Spacer
2
Clamp, hose
17
Cooler, oil
3
Hose
18
Tube
4
Adapter
19
Hose, 90
5
Seat, internal
20
Adapter
Elbow, 90
6
Tee, pipe
21
7
Nipple, pipe
22
Nut
8
Elbow, 90
23
Washer, lock
9
Hose, 90'
24
Screw, cap
10
Adapter
25
Exchanger, heat
11
Hose
26
Screw, cap
12
Hose 45'
27
Bonnet
13
Nut
28
Gasket
14
Washer, lock
29
Core assembly
15
Screw, cap
30
Plug, pipe
Figure 5-37. Heat exchange assembly, exploded view.
c. Cleaning, Inspection and Repair.
e. Installation. Install heat exchanger (TM 5-3810-
(1) Clean all parts with an approved cleaning
232-12).
solvent and dry thoroughly.
5-29. Hydraulic Reservoir Tank
(2) Inspect shell and tubes for cracks, breaks,
a. Removal.
and other damage. Repair or replace defective parts as
(1) Model 2380.
Remove the hydraulic
necessary.
reservoir tank as illustrated on figure 5-38A.
d. Reassembly.
Refer to figure 5-37 and
(2) Model 2385.
Remove the hydraulic
reassemble the heat exchanger as illustrated.
reservoir tank as illustrated on figure 5-38B.
5-77
