1
Spring
10
Cylinder, slave
2
Screwcap
11
Screw, set
3
Washer lock
12
Clutch band assembly
4
Lock pin
18
Rivet, semi-tubular
6
Pin
14
Lining kit, clutch
6
Link, dead end
16
Band
7
Push rod
16
Spider, hoist clutch r.h.
8
Nut, self-locking
17
Screw, set
9
Stud
18
Nut
B-Clutch band, main and auxiliary hoist.
Figure 6-11. (2) -Continued.
c. Cleaning, Inspection, and Repair.
ical sequence as illustrated on figure 6-11.
e. Installation.
(1)
Clean all parts with an approved
(1) Install the hoist drum shaft assembly as
cleaning solvent and dry thoroughly.
illustrated on figure 6-10.
(2) Inspect all parts for excessive wear or
(2) Install the brake band assemblies (TM 5-
damage. Replace or repair worn or damaged parts.
d. Reassembly. Reassemble the crane hoist drum
810-282-12).
(3) Install the main drive gear guard (TM 5-
shaft assembly in the reverse of the numer-
3810-282-12).
6-16
