6-8. Inspection and Repair
6-9. Reassembly and Installation
a. Inspect the crane boom for broken welds, bends,
a. Reassembly. Reassemble the crane boom as
and other damage. Repair or replace the crane boom as
illustrated in figure 6-8.
necessary.
b. Installation. Install the crane boom assembly TM
b.
Inspect the boom point sheaves, roller
5-3810-232-12.
guards and other parts for breaks, excessive wear, and
other damage. Replace or repair all defective parts.
Section IV. CRANE CAB ASSEMBLY
b. Disassembly. Disassemble the cab assembly as
6-10. Removal and Disassembly
illustrated in figure 6-9.
a. Removal. Refer to paragraph 2-8 and remove
the cab assembly.
6-11
