Key to Figure 6-9
1 Nut
20
Panel
39
Glass
2 Washer
21
Door pin
40
Frame
3 Screw
22
Panel
41
Weather strip
4 Washer
23
Guide
42
Filler strip
5 Screw
24
Panel
43
Glass
6 Screw
25
Plate
44
Top
7 Screw
26
Panel
45
Weather strip
8 Screw
27
Door
46
Filler strip
9 Screw
28
Door
47
Glass
10 Nut
29
Cover
48
Panel
11 Clamp
30
Panel
49
Weather strip
12 Door
31
Panel
50
Filler strip
18 Door
32
Panel
51
Glass
14 Door
33
Panel
62
Panel
15 Door
34
Panel
53
Weather strip
16 Screw
35
Panel
54
Filler strip
17 Washer
36
Panel
55
Glass
18 Nut
37
Weather strip
19 Panel
38
Filler strip
6-11. Inspection and Repair
6-12. Reassembly and Installation
a. Reassembly. Reassemble the cab assembly
Inspect for cracks, breaks, and other damage. Repair
cracks and breaks by welding if possible.
illustrated in figure 6-9.
b. Installation. Refer to paragraph 2-8 and install
the cab assembly.
Section V. CRANE HOIST DRUM SHAFT
6-13. General
6-14. Crane Hoist Drum Shaft Assembly
a. Removal.
The crane hoist drum shaft is mounted uppermost on the
revolving frame between the countershaft and the
(1) Remove the main drive gear guards (TM
horizontal reversing shaft and is gear driven from the
53810-232-12).
horizontal reversing shaft. It is secured to the frame by
(2) Remove the brake band assemblies (TM
two bearing assemblies which are bolted to the frame.
&3810-232-12).
The cable drums are held stationary by the brakes until
(3) Disconnect hoses to rotating joints (TM 5-
the individual clutch assembly is engaged, which in turn
3810-232-12).
rotates the clutch and brake drum. The hoist drum shaft
(4) Remove the hoist drum shaft assembly as
assembly can be removed as a unit without disturbing
instructed in figure 6-10.
the counter-shaft or horizontal reversing shaft.
6-13
