TM 5-3810-289-34
(2) Rocker arm assembly.
(a) Slide rocker lever shaft bearings and
rocker levers off rocker lever shaft.
(b) Remove adjusting screw locknuts and
adjusting screws from rocker levers.
c. Cleaning and Inspection.
(1) Cylinder head cover.
(a) Clean all parts except element in an
approved cleaning solvent and dry with moisture-free
compressed air.
(b) Remove all gasket material from sealing
edge of cover.
(c) Inspect cover for cracks, dents and
distorted sealing area; discard unserviceable parts.
Figure 3-135. Rocker lever mounting capscrews
removal.
Figure 3-133. Cylinder head cover removal.
Figure 3-136. Rocker arm assembly removal.
Figure 3-134. Loosening rocker arm lever jam nuts.
Figure 3-137. Crankcase breather-bottle stopper type.
3-49
