SECTION IV
PREVENTIVE MAINTENANCE
CHECK CLUTCH OIL LEVEL
To check the oil level in the clutch master cylinder,
proceed as follows (see Figure 4-16): 1. Remove the
panel on the front side of the carrier cab dashboard.
2. Clean the area around the master cylinder filler cap,
and then remove the filler cap. The oil should be up to
the bottom of the filler neck. If necessary, add oil of the
type specified in Section III to bring the oil to the proper
level. Replace the filler cap.
NOTE
If the oil in the master cylinder is
extremely low, check
the master
cylinder,
slave
cylinder,
and
connecting lines and fittings for
leaks. Repair or replace any faulty
Figure 4-16. Clutch Master Cylinder
components immediately.
1-4-14
