TM 5-3810-294-34
i. Install collar assembly (22) over the flange on end of
5-6. Transmission Disassembly
sliding sleeve (18) and secure in position with capscrews
a. Disassemble clutch as instructed in paragraph 5-3.
(19), washers (20), and nuts (21). Install grease fitting
b. Place the transmission assembly on the bench and
(23).
block it so it cannot move. Refer to figure 5-3 during
j. Install entire subassembled clutch on the end of the
transmission disassembly. An assembled view of the
transmission input shaft, making sure keyway lines up
transmission / clutch assembly is shown in figure 5-4 for
with key (26), and install key (26). Be sure the knobs on
an additional reference.
collar (22) fit into lever (31) slots. Connect hose (24).
Install tab washer (4) and secure the entire assembly in
position with nut (3).
5-6
