TM 5-3810-294-34
n. Refer to paragraph 5-2 and install the
engine clutch before returning machine to
clutch/transmission assembly on the engine.
operation.
o. Refer to figure 2-3 and install the engine-
q. Refill the transmission with proper lubricant
clutch / transmission assembly in the crane upper.
as instructed in TM 5-3810-294-20. Lubricate the
p. Refer to TM 5-3810-294-20 and adjust the
clutch and the engine.
Section II. REPAIR OF CRANE PROPELLER SHAFT
5-9. Description
5-11. Disassembly
The propeller shaft connects the transmission
Refer to figure 5-5 and disassemble the propeller
output shaft to the warm shaft (refer to fig. 5-1).
shaft.
5-10. Removal
Refer to TM 5-3810-294-20 and remove the
propeller shaft.
1.
Shaft
10.
Flange yoke
2.
Dust cap
11.
Lubrication fitting
3.
Washer
12.
Retaining ring (4)
4.
Cork washer
13.
Roller Bearing (4)
5.
Lubrication fitting
14.
Journal assembly
6.
Sleeve yoke
15.
Lubrication fitting
7.
Roller bearing (4)
16.
Flange yoke
8.
Retaining ring (4)
17.
Plug
9.
Journal assembly
Figure 5-5. Propeller shaft assembly exploded view.
5-12. Inspection and Repair
5-5) are in good condition and not excessively worn.
Replace any worn or damaged part. Clean all metal
Always replace cork washer (4). Replace retaining
parts with a suitable solvent before inspection.
rings if they have a permanent set. Replace
Check that lubrication fittings (11, 5, and 15, fig.
damaged threaded items.
5-10
