TM 5-3810-294-34
Section II. REPAIR OF BATTERY CABLES, SUPPRESSION LEADS, AND WIRING HARNESS
dition and the connecting lugs are broken, repair the
8-7.
Inspection and Repair of Battery Cables
cable by removing the connecting lug, cleaning the wires,
a. Inspection.Inspect the battery cables for
and crimping a new connecting lug on the end of the
worn or frayed insulation, cuts in the cables, or loose or
cable.
broken connecting lugs.
8-8.
Inspection and Repair of Wiring Harness
b. Repair. Worn or frayed insulation can be
repaired by covering the worn area with a suitable
and Supression Leads
electrical tape. If battery cables are cut, or broken wires
Refer to TM 5-3810-294-20 for inspection and repair
are apparent in the cable, the entire cable must be
procedures of wiring harness and supression leads.
replaced. If the cables are in good con-
8-3
