TM 11-5895-1551-23P
b. Installation.
b. Installation.
(1) Refer to figure 11-5 and install the front axle
(1) Position forward-rear axle assembly under
and spring assembly.
carrier.
(2) Install shock absorbers (refer to TM 5-
(2) Connect torque rods and equalizer beams
3810-294-20).
(fig. 7-6) to both ends of forward-rear axle assembly.
(3) Connect front axle propeller shaft (refer to
(3) Install rear wheels (refer to TM 5-3810-294-
TM 5-3810-294-20).
20).
(4) Connect air lines to front brake chambers.
(4) Remove hydraulic jack.
(5) Connect steering link to steering arm (refer
(5)
Connect intermediate and interaxle
to TM 5-3810-294-20).
propeller shafts to forward-rear axle assembly (refer to
(6) Remove hoist from front end of carrier.
TM 5-3810-294-20).
(6) Connect air lines to brake chambers,
11-12. Forward-Rear Axle Assembly
interaxle differential lockout, and air brake system
a. Removal.
components located on the forward-rear axle assembly.
(1) Tag and disconnect air lines from brake
(7) Lubricate forward-rear axle assembly in
chambers, interaxle differential lockout, and air brake
accordance with the current LO.
system components located on forward-rear axle
11-13. Rear-Rear Axle Assembly
assembly.
(2)
Disconnect intermediate and interaxle
a. Removal.
propeller shafts from forward-rear axle assembly (refer to
(1) Tag and disconnect air lines from brake
TM 5-3810-294-20).
chambers and air brake system components located on
(3) Position a hydraulic jack under the rear
the rear-rear axle assembly.
carrier frame. Raise the jack until weight of carrier is off
(2) Disconnect interaxle propeller shaft from
the rear axles, but with rear wheels on the ground.
rear-rear axle (refer to TM 5-3810-294-20).
(4) Remove rear wheels (refer to TM 5-3810-
(3) Position a hydraulic jack under the rear
294-420).
carrier frame. Raise the jack until weight of carrier is off
(5) Place a suitable support under forward-rear
the rear axles, but with rear wheels on the ground,
axle assembly.
(4) Place a suitable support under rear-rear
(6) Disconnect torque rods and equalizer
axle assembly.
beams (fig. 11-6) from both ends of forward-rear axle
(5) Remove rear wheels (refer to TM 5-3810-
assembly.
294-20).
(7) Remove forward-rear axle assembly.
(6)
Disconnect torque rods and equalizer
beams (fig. 7-6) from both ends of rear-rear axle
assembly.
(7) Remove rear-rear axle assembly from
carrier.
b. Installation.
(1) Position rear-rear axle assembly under
carrier.
(2) Connect torque rods and equalizer beams
(fig. 7-6) to both ends of rear-rear axle assembly.
(3) Install rear wheels (refer to TM 5-3810-294-
20).
(4) Remove hydraulic jack.
(5) Connect interaxle propeller shaft (refer to
TM 5-3810-294-20).
(6) Connect air lines to brake chambers and air
brake system components located on rear-rear axle
assembly.
(7) Lubricate rear-rear axle assembly in accordance with
the current LO.
Figure 11-6. Rear axles, removal and installation
11-10
