TM 5-3810-294-34
Section VI. REPAIR OF AIR COMPRESSORS
12-21. Description
12-22. Removal
The air compressor is lubricated by oil from the
Refer to TM 5-3810-294-20 for instructions to remove
engine system and cooled by water from the engine
the air compressor from the engine.
system. Therefore, lubrication and cooling depend
12-23. Disassembly
upon proper lubrication and cooling for the engine.
Refer to figure 12-5 and disassemble the compressor as
Intake air is taken from the clean air side of the
follows.
engine air cleaner.
KEY to fig. 12-5.
31.
Connecting rod (2)
1. Hex head screw (2)
32.
Piston (2)
2. Lock washer (2)
33.
Bushing (2)
3. Discharge fitting
34.
Cylinder block
4. Gasket
35.
Gasket
5. Gasket
36.
Screw (6)
6. Screw (10)
37.
Lock washer (6)
7. Gasket
38.
Stop (2)
8. Screen
39.
Cup (2)
9. Gasket
40.
Packing (4)
10. Air intake connector
41.
Piston (2)
11. Screw (2)
42.
Seat (2)
12. Lock washer (2)
43.
Saddle
13. Cap (2)
44.
Spring
14. Spring (2)
45.
Seat
15. Valve (21
46.
Bearing (2)
16. Plug
47.
Nut
17. Seat (2)
48.
Screw (4)
18. Cylinder head
49.
Lock washer (4)
19. Plug (6)
50.
Cover
20. Spring (2)
51.
Screw (4)
21. Valve (3)
52.
Lock washer (4)
22. Guide (2)
53.
Cover
23. Screw (4)
54.
Gasket
24. Lock washer (4)
55.
Gasket
25. Cap
56.
Packing
26. Bearing insert (4)
57.
Seal
27. Ring (41
58.
Crankshaft
28. Ring (4)
59.
Key
29. Lock wire 121
60.
Bearing (2)
30. Pin (2)
61.
Compressor body
