TM 5-3810-294-34
Figure 13-3. Gear cover, exploded view
14.
Gasket
1.
Nut
15.
Oil seal
2.
Flat washer
16.
Capscrew (2)
3.
Crankshaft pulley
17.
Lockwasher (2)
4.
Screw (2)
18.
Water inlet
5.
Lockwasher (2)
19.
Packing
6.
Timing indicator
20.
Gasket
7.
Capscrew (6)
21.
Oil filter cap
8.
Capscrew (2)
22.
Oil filter pipe
9.
Capscrew (4)
23.
Capscrew (2)
10.
Capscrew
24.
Nut (2)
11.
Capscrew
25.
Mount
12.
Lockwasher (12)
26.
Engine support
13.
Gear cover
c. Remove capscrews (23) and nuts (24).
Lift off
a. Remove nut (1), washer (2), and pull crankshaft
mount (25) and engine support (26).
pulley (3). Remove capscrews (4), lockwashers (5) and
timing indicator (6).
13-14. Cleaning
b. Remove capscrews (7, 8, 9, 10 and 11), and
a. Clean all metal parts in dry cleaning solvent
lockwashers (12), and lift gear cover (13) from the
(Federal Specification P-S-661) and dry thoroughly with
crankcase. Remove gasket (14) and oil seal (15
compressed air.
b. Clean all remaining gasket material from parts.
13-13. Disassembly
13-15. Inspection Examine all parts for cracks or
Refer to figure 13-3 and disassemble as follows
breakage.
a. Remove capscrews (16) and lockwasher (17),
13-16. Repair and Replacement
water inlet (18) and filler cap (19). Remove gasket (20).
a. Refer to TM 5-3810-294-34P for repair parts
b. Remove oil filler cap (21) and oil filler pipe
(22).
13-5
