TM 5-3810-295-34
1
Cap Screw (2)
8
Sink (2)
2
Lock washer (2)
9
Lever
3
Lock plate
10
Knob
4
Cotter pin (2)
11
Lubrication fitting
5
Pin
12
Pin
6
Cotter pin (4)
13
Bracket
7
Pin (2)
Figure 6-3. Crane lock assembly.
c.
Repair the crane lock by replacing any parts
quired. Install and lubricate the crane lock assembly.
that are defective.
Lock plate (3) is used to lock the lever in the
disengaged position only.
6-11. Reassembly and Installation
Refer to figure 6-3 and reassemble the crane lock as re-
6-5
