TM 5-3810-295-34
CHAPTER 7
REPAIR OF CRANE CAB COMPONENTS
AND CONTROLS
Section I. REPAIR OF SWING BRAKE CONTROL STAND
control stand as indicated by the order of index num-
7-1.
Description
bers.
The swing brae control stand provides a housing for
7-4.
Cleaning, Inspection and Repair
the swing brake control lever. The swing brake control
a. Can all parts of the swing control stand with
lever is designed s that the swing brake is always ap-
cleaning solvent, Federal Specification P-D-680, and
plied unless the lever is released by the operator.
wipe dry.
7-2.
Removal
b. Inspect pins link and spacers for excessive
a Disconnect hydraulic fluid lines and drain master
wear or damage. Inspect threads on screws and yoke
cylinder or fluid.
end for damage.
b. Immediately plug hydraulic lines.
c. Repair the control stand by replacing any
7-3.
Disassembly
damaged or excessively worn parts.
Refer to figure 7-1 and disassemble the swing brake
7-1
