TM 5-3810-295-34
b. Refer to figure 15-8 and remove and disassemble
universal joint (6). Lift propeller shaft assembly out of
the converter to transmission and the transmission t0
vehicle.
rear axle propeller shafts as follows:
(3) Remove dust cap (7), felt washer (8) and
(1) Remove screws (1) and nuts (2), slide slip joint
washers (9) and (10).
(12) back and remove universal joint (3)
(4) Separate splined yoke (11) and slip yoke (12).
(2) Remove screws (4) and nuts (5), remove
1
Screw
2
Nut
3
Universal joint
4
Screw
5
Nut
6
Universal joint
7
Dust cap
8
Felt washer
9
Washers
10
Washers
11
Splined yoke
12
Slip yoke
Figure 15-8. Propeller shaft (converter to transmission) and (transmission to rear axle).
15-15
